Toyota Tire Pressure Light Blinks Then Stays On (With Solutions)
A faulty TPMS sensor that keeps the light functioning leads them to stay on. Also, new tire installation can cause the sensor to send faulty readings to the lights. Sometimes, extreme weather is also the reason for blinking TPMS lights.
Wave off your worries because to fix the flashing light, I’ll walk you through how to reset tire pressure light on different models. So this might be your lucky day!
What Causes Toyota Tire Pressure Light Blinks Then Stay On?
Toyota tire pressure lights don’t always indicate low air–pressure on the tires. Rather, they can malfunction and stay on due to external or internal factors at times. Here are some of the causes I’ve found:
- Malfunctioning TPMS sensor
- Physical damage to the wheel rims
- Tire rotation or replacement
- Winter morning or low temperature
Troubleshooting Toyota Corolla Tire Pressure Light Won’t Turn Off
Driving with tire pressure (TPMS) light on, even when the tires are fine, may distract your focus from the road. And it can lead to a fatal accident. So, without any delay, let me show you how you should fix the light with these workarounds below –
#1. Fix the Faulty TPMS Sensor
The TPMS sensor is the main system that lights up the tire pressure light. But it can malfunction and sends faulty readings, which cause the light to stay on.
Moreover, it mainly becomes faulty due to wear and tear in its seal or gasket. And such outer damages prevent the sensor from functioning properly.
Also, the sensor works on the outboard battery. And from my experience with these batteries, they tend to wear out in 5 to 10 years. So, without an active battery, the sensor can’t get the power to turn off the light.
Consequently, you need to reset the faulty TPMS sensor to fix the Toyota tire pressure light blinks then stays on issue. Here is how to turn off tire pressure light toyota corolla:
- Step 1: If the tires are low on air, fill them to the PSI recommended in the manufacturer’s chart. Step 2: Start the ignition. For the push button model, tap the “Engine Start” key twice but don’t hold the brake.
- Step 3: Tap the backward forward icon or the◄►button followed by the “Settings” option with a cogwheel icon.
- Step 4: Scroll down or up with the up and down key and select “Vehicle Settings.”
- Step 5: Hold the “Ok” button and bring a new menu. Then, choose the TPWS option and press the Ok button.
- Step 6: Choose “Set Pressure” and hold the Ok button to get into a new menu.
- Step 7: Let the TPMS light flash thrice then release the Ok key. Start the engine. And make sure to shut down the ignition. Or else the toyota corolla tire pressure light won’t turn off.
If resetting doesn’t solve the blinking tire pressure light toyota corolla, you might need a new TPMS sensor. To confirm, contact an automotive expert.
Now, let’s get into the steps for a Toyota sienna reset tire pressure light
- Step 1: First off, park the vehicle and turn off the ignition. Then, if the tire pressure is correct, turn on the engine right away.
- Step 2: Long-press the TPMS button until the light blinks or flashes thrice.
- Step 3: After a few minutes, turn off the engine. And the system will reset.
Note that for the 2019 Toyota Tacoma tire pressure sensor reset, you can follow the same steps listed for the Sienna.
For 2010, 2011, 2012 Toyota Camry tire pressure light reset, let me walk you through the 2 easy steps:
- Step 1: Repeat steps 1 to 3 described in the above section.
- Step 2: Once the light blinks 3 times, drive straight at a speed of 25mph for almost ten to fifteen minutes. This way, it’ll reset the sensor so that the lights turn off.
The classic method of driving at a 25 mph speed also fixes the Lexus tire pressure light is on but tires are full issue. But without a constant drive speed, the tire pressure light won’t go off.
For Mazda 3 tire pressure light reset, here is what you should do
- Step 1: First off, switch the ignition on.
- Step 2: Next, find the TPMS button under the steering wheel beside the dashboard.
- Step 3: Long press the TPMS button until the tire pressure lights blink 3 times.
- Step 4: After releasing the reset button, start the engine straight away. In about twenty seconds, the lights will go off.
#2. Inspect for Physical Damage and Fix
Do you often drive on rough terrains? Well, in that case, the pebbles and rock cause wear and tears in the wheels. It especially removes the seal between the rim and the tire. As a result, the TPMS located in the rim gets damaged. And the tire loses some air pressure, even if you have filled them recently.
With such leakage and damage, the light may blink several times. So, I’d recommend inspecting the car and rim to see if there is any tear or debris. If any, here is what to do
- Step 1: with microfiber, clean the wheels and rim. Alternatively, you can use a soft bristle brush to remove the dust and debris.
- Step 2: wash the wheels after each drive with soapy water. Being an automotive expert, I’ve dealt with several dirty rims. And pressure washing them works best to remove the pebbles.
- Step 3: Now, lubricate the rims right away.
- Step 4: If there is damage to the TPMS, feel free to contact a professional to replace it.
#3. Drive after a Tire Replacement
I’ve seen many Toyota user’s head to an automotive shop in order to fix a faulty blinking TPMS light. Upon inspecting, I found that the problem lies in their recently replaced tires.
Sometimes, the TPMS sensor can’t adjust to the specifications of newly installed tires. So, its lights tend to malfunction. Here are the handy steps based on my personal experience:
- Step 1: For those who have recently changed the tires, go to a drive at 50mph or constant speed for ten minutes.
- Step 2: After the drive, the sensor will align with the new tire specs. And the lights will turn off upon starting the engine off.
- Step 3: If it doesn’t resolve the issue, go for a seasoned mechanic.
#4. Warm Up the Tires when Temperature Drops
Speaking from my experience, all types of car tires tend to decrease air pressure if the temperature drops outside, especially in the winter. And due to low air pressure, the lights are prone to stay on.
Here is the workaround I’ve gathered through 2 steps:
- Step 1: During winter morning, go for a drive for ten to fifteen minutes.
- Step 2: Once you drive, the tires will warm up, and the temperature inside will rise. So, the air pressure stabilizes, and it fixes the Toyota tire pressure light blinks then stays on issue.
Conclusion
To recap, Here is a list of the common reason for Toyota Tire Pressure Light Blinks Then Stays On:
- Malfunctioning TPMS sensor
- Physical damage to the wheel rims
- Tire rotation or replacement
- Winter morning or low temperature
Before you follow the guidelines regarding the Toyota reset tire pressure light, make sure the malfunction isn’t occurring due to a faulty TPMS sensor.
If the Toyota tire pressure light blinks then stays on issue appears for the external temperature or debris, there is no point in fixing a TPMS sensor. For fixing a tpms light flashing Toyota, I’d recommend inspecting the rims first and looking for debris.
Sometimes, taking the dirt off can fix the issue. If no external cleaning resolves the problem, then try the steps to reset the malfunctioning TPMS.
Video References
DIYAutoworksNG
How to Automotive
Related Articles:
- What Causes Prius Tire Pressure Light Blinking?
- What Does The Blinking Tire Pressure Light Subaru Mean?
Certification: BSc in Mechanical Engineering
Education: Mechanical engineer
Lives In: 539 W Commerce St, Dallas, TX 75208, USA
Rasel is an auto mechanic student and writer with over half a decade of experience in the automotive field. He has worked with top automotive brands such as Lexus, Quantum, and also owns two automotive blogs autocarneed.com and taxiwiz.com.