4 Common Dodge RAM Tire Pressure Sensor Problem
Dodge RAM models have a sensor that automatically monitors the tire pressure. This safety feature is efficient enough to notify the driver regarding a slow leak and prevent potential accidents.
Here is a list of the 4 most common Dodge RAM Tire Pressure Sensor Problem:
- Improper installation and calibration
- TPMS lost connection
- new tires or wheels
- weather or temperature change.
Besides, the tire pressure sensor can be faulty, and replacement is necessary. Let’s figure out how you can understand the problem and solve it.
reasons for Dodge RAM Tire Pressure Sensor Problem
Dodge RAMs have a warning light on the dashboard. If the light starts flashing, be sure there is something wrong with the sensor. The problem can be with one or more tires of the Dodge RAM.
The prime responsibility of these sensors is to monitor the tire pressure. If they identify any discrepancy in the pressure, they alert the driver.
A few things are responsible for the problem.
- Low air in the tire
- Slow leak in the tire
- False reading
Consider being attentive to the problem when you notice the blinking “tire pressure sensor fault” warning light. Your Dodge RAM fuel efficiency will reduce due to the low tire pressure. Also, you will face difficulty in handling your Dodge RAM.
Troubleshooting Dodge RAM Tire Pressure Sensor Issues
Repairing or solving TPMS errors is often damn simple. However, I suggest calling a professional since proper installation and calibration are key to avoiding further issues.
Solution #01: TPMS Sensor Replacement for Faulty Sensor
The module of the tire pressure monitoring system recognizes loss in communication because of failed TPMS. Thus, the warning light turns on.
Now, such a failure provides incorrect tire pressure. It causes a flat tire if the problem remains unattended. Even the sensor may give low or high-pressure readings while properly inflating the tire.
Replacing the faulty sensor is the only solution. It would be best to contact a professional to complete the task. The estimated cost for the TPMS sensor replacement will be $214 – $258.
Solution #02: TPMS Requires Relearn
TPMS warning lamps will also illuminate when a relearn is needed. A few Dodge RAM models will display messages regarding lost communication or an inoperative tire pressure monitoring system.
Remember to monitor the tire pressure when driving when you experience an error with the system. Since the sensor is providing incorrect data, relearning the TPMS becomes mandatory.
Wondering how to reset the Dodge RAM tire pressure sensor?
No worries!
All you need to do is, read the instruction manual intently and follow the instructions. Also, you can follow the prompts from the dashboard.
However, unsure about following the steps and need professional help? Expert help will cost you $35 – $44.
Solution #03: Wheel Replacement
Although your Dodge RAM wheel will show a few signs of a TPMS problem, you shouldn’t ignore these symptoms. If you see visible cracks in the wheel after hitting a large bumper, remember it happens because of a TPMS error.
When air loss occurs from the tires, the leak may appear quickly. Also, if the tires become imbalanced, you will experience vibration in the steering wheel. Besides, popping or cracking noise may develop due to improper wheel bolts or nuts.
In such situations, replacing the wheel is the best solution. I recommend going to a skilled technician for wheel replacement. The reason is the air pressure of the new wheel needs to be set accurately after the installation of the new tire. Otherwise, the TPMS problem will continue.
For a wheel replacement, an experienced technician will cost you $739 – $751.
Why Shouldn’t You Ignore the Dodge RAM TPMS Problem?
The TPMS problem is a minor issue. But it can turn into a major one if you ignore it. Tire pressure sensor errors can easily be solved or remedied. For this reason, most of us tend to overlook it. This is where we make the biggest mistake.
The prime responsibility of TPMS is to keep you safe on the road. If the tire pressure is inadequate, you may fail to control your Dodge RAM when driving.
More dangerously, if you don’t look at the problem when the first sign appears, you could end up with a flat tire. Furthermore, you will be stranded due to the slow leak.
Fuel efficiency reduction is another crucial consequence of driving with incorrect tire pressure. Such a problem will create a negative impact on your Dodge RAM mileage.
Can TPMS Problem Damage Your Dodge RAM Tire?
Yes, the TPMS problem can damage your Dodge RAM tire in 2 ways.
#1. If the sensor installation is done incorrectly. Air leaks will occur in the tire. Thus, premature wear and tear can happen. Also, the tire may burst.
#2. If the sensor calibration is completed improperly. This will give you the wrong reading. Finally, you will end up with overinflated or underinflated tires. The consequences will be blowout or premature wear.
In order to avoid damaging your Dodge RAM tire, ensure the below factors.
- Correct installation of the sensors
- Proper calibration after installing
That is why I recommend asking professionals for help when solving TPMS problems. By ensuring the above factors, your Dodge RAM tire will last as long as possible.
frequently asked questions (FAQs)
You mustn’t drive Dodge RAM when the TPMS light is on; it is completely unsafe. If you drive, the tire may burst or lead to possible tire failure, causing danger to the driver and passengers. Monitor the TPMS system following the specific instructions shared in the owner’s manual.
Dodge RAM tire pressure sensors last as long as your tire is OK. However, a few things can shorten the lifespan of this safety equipment.
1. Extreme temperature
2. Exposure to elements
3. Improper installation
4. Incorrect calibration
Regular tire pressure checking is crucial to get long-term service from your Dodge RAM tire pressure sensors.
Conclusion
To recap, Here is a list of the 4 most common Dodge RAM Tire Pressure Sensor Problem:
- Improper installation and calibration
- TPMS lost connection
- new tires or wheels
- weather or temperature change.
Dodge RAM tire pressure sensors are a piece of vital safety equipment. These devices keep you safe on the road by ensuring your tires are properly inflated and help you avoid blowouts.
If you notice a Dodge RAM tire pressure sensor type problems, don’t be late to solve it. The on-time solution will confirm trouble-free driving. Also, ensure periodic maintenance to prevent premature wear and tear of the sensors.
Video References
Goobnut Toy Reviews
Related Posts:
- BMW Tire Pressure Sensor Keeps Going Off (+ Malfunction)
- GMC Tire Pressure Sensor Problems (2010-17)- [+ Reset Guide]
- Silverado Tire Pressure Sensor Problems (2004-20) – [Easy Fix]
Certification: BSc in Mechanical Engineering
Education: Mechanical engineer
Lives In: 539 W Commerce St, Dallas, TX 75208, USA
Rasel is an auto mechanic student and writer with over half a decade of experience in the automotive field. He has worked with top automotive brands such as Lexus, Quantum, and also owns two automotive blogs autocarneed.com and taxiwiz.com.